Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001)
8. Disconnect the yellow 2-way SRS connector and horn lead located behind the inflator module.
9. Apply a setting mark (1) across the steering wheel and shaft so parts can be reassembled in their original position.
10. Move the front wheels to the straight ahead position, then use steering wheel remover J-29752 to remove the steering wheel.
CAUTION: Never apply force to the steering wheel shaft using a hammer or other impact tools in an attempt to remove the steering wheel. The
steering shaft is designed as an energy absorbing unit.
