Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001)
-
First, align the height of regulator to the access hole. Remove 2 screws attaching bottom channel and regulator, then remove the glass
-
Remove the window glass by tilting it as necessary.
16. Remove the window regulator.
-
Remove the window regulator fixing bolts and pull the regulator out from the lower hole of the door panel.
17. Remove the glass run.
-
Pull the glass run out from the door frame.
Installation
To install, follow the removal steps in the reverse order, noting the following points: