Pilot V6-3.5L (2004)
NO - Go to step 6.
5. Check for a DTC.
-
If there are no DTCs present:
The ignition key light and beeper will not blink/beep again after the Mode 1 indication.
-
If there is a DTC present:
About 1 second after entering Mode 1, the ignition key light and beeper indicate the DTC(s), then repeat it every 3 seconds. If there is more
than one DTC, the system will indicate them in succeeding order.
Is there a DTC present?
YES - Follow the procedure in the chart above.
NO - Go to Mode 2.
6. Remove the special tool from the MPCS inspection connector.
7. Remove driver's multiplex control unit from the driver's under-dash fuse/relay box.
