Pilot V6-3.5L (2004)
7. Install the seat-back cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the fasteners,
hooks and inside springs.
-
Replace any clips (A) you removed with new ones using commercially available upholstery ring pliers (B).
-
Use only original Honda replacement seat-back covers.
-
Replace the back panel clips with new ones.
Seat Cushion Cover
1. Remove the front seat.
2. Remove the seat cushion, 8-way power, manual height adjustable, manual.
3. Release the clips (A) and hooks (B) from under the seat cushion, then loosen the seat cushion cover (C).
4. Pull back the edge of the seat cushion cover all the way around, and release the clips (A), then remove the seat cushion cover (B).
