Pilot V6-3.5L (2004)
7. Lift and pull out the release button (A), and remove the screw (B), then remove the headrest guide (C).
8. Remove the screws securing the recline lever.
9. While holding the recline lever (A) away from the seat-back cover (B), pull the retainers (C) out from under the lever.
10. Pull back the edge of the seat-back cover all the way around, and release the clips (A), then remove the seat-back cover (B).
11. Install the seat- back cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hook and