Pilot V6-3.5L (2004)
3. Remove the pad shims (A) and pads (B).
4. Remove the pad retainers (A).
5. Clean the caliper thoroughly; remove any rust, and check for grooves and cracks.
6. Check the brake disc for damage cracks.
7. Clean and install the pad retainers.
8. Apply Molykote M77 grease (P/N 08798-9010) to the pad side of the outer shims (A), both sides of the inner shim (B), the back of pads (C), and
the other areas indicated by the arrows. Wipe excess grease off the shims and pads. Contaminated brake discs or pads reduce stopping ability.
Keep grease off the brake discs and pads.
9. Install the brake pads and pad shims correctly. Install the pad with the wear indicator (D) on the inside.
If you are reusing the pads, always reinstall the brake pads in their original positions to prevent a momentary loss of braking efficiency.
