Pilot V6-3.5L (2004)
14. Remove the two bolts (A) securing the radiator fan shroud, then remove the radiator fan shroud assembly (B) from the battery side.
15. Remove the two bolts (C), and loosen the two bolts (D) securing the condenser fan shroud, then remove the condenser fan shroud assembly (E)
from the battery side.
16. Remove the lower radiator hose (A) and automatic transmission fluid (ATF) cooler hoses (B). Plug the ATF cooler hoses and lines.
17. Pull up the radiator assembly (A), then remove the lower cushions (B).
18. Remove the radiator fan switch C, radiator cap (D) and drain plug (E).
19. Install the radiator in the reverse order of removal.
20. Install the bulkhead bracket in the reverse order of removal. Apply body paint to the bulkhead bracket mounting bolts.
21. Set the upper and lower cushions securely.
