Pilot V6-3.5L (2004)
Air Door Actuator / Motor: Service and Repair
Rear Air Mix Control Motor
Rear Air Mix Control Motor Replacement
1. Remove the driver's seat.
2. Remove the center console.
3. Disconnect the 7P connector (A) from the rear air mix control motor (B). Remove the self-tapping screws and the rear air mix control motor from
the rear heater-A/C unit.
4. Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make
sure the motor runs smoothly.
