Pilot V6-3.5L (2004)
![background image](/honda/pilot/v6-3.5l/Page-2472002.png)
5. Reconnect the driver's multiplex control unit to the driver's under-dash fuse/relay box, and perform the given input tests at the appropriate
connectors on the driver's under-dash fuse/relay box.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 6.
Door Multiplex Control Unit
6. Remove the driver's door panel, and disconnect the connector A (20P) from the door multiplex control unit.
7. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 8.
8. Reconnect the connector to the door multiplex control unit, and make this input test.