Pilot V6-3.5L (2004)
Alarm Module: Testing and Inspection
Keyless Entry/Security Alarm System
Control Unit Input Test
NOTE: These tests cover the door, driver's, and passenger's multiplex control units.
1. Before testing the power door lock and security control functions, troubleshoot the multiplex control system.
Driver's Unit
2. Remove the driver's multiplex control unit from the driver's under-dash fuse/relay box.
3. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 4.