Pilot V6-3.5L (2004)
![background image](/honda/pilot/v6-3.5l/Page-1914001.png)
Seat Belt Retractor: Testing and Inspection
Inspection
For front seat belt retractors with seat belt tensioners, review the SRS component locations and the precautions and procedures in the SRS section before
performing repairs or service.
Retractor
1. Before installing the retractor, check that the seat belt can be pulled out freely.
2. Make sure that the seat belt does not lock when the retractor (A) is leaned slowly up to 15 ° from the mounted position. The seat belt should lock
when the retractor is leaned over 40 °. Do not attempt to disassemble the retractor.