Pilot V6-3.5L (2004)
27. Install the steering joint cover (A) with the clamps (B) and clips (C).
28. Install the front wheels.
29. Connect the battery cable.
-
Do the PCM idle learn procedure.
-
Do the power window control unit reset procedure.
-
Enter the anti-theft codes for the radio and the navigation system, then the customer's radio station preset's.
-
Set the clock.
30. Fill the system with power steering fluid, and bleed air from the system.
31. After installation, perform the following:
-
Start the engine, allow it to idle, and turn the steering wheel from lock-to-lock several times to warm up the fluid. Check the gearbox for leaks.
-
Adjust the front toe.
-
Check the steering wheel spoke angle. Adjust by turning the right and left tie-rods equally, if necessary.
