Pilot V6-3.5L (2004)
2. Remove the wheel nuts and front wheels.
3. Remove the brake hose mounting bolt (A).
4. Remove the caliper mounting bolts (B), and hang the caliper assembly (C) to one side. To prevent damage to the caliper assembly or brake hose,
use a short piece of wire to hang the caliper from the undercarriage.
5. Remove the wheel sensor (A) from the knuckle (B). Do not disconnect the wheel sensor connector.
6. Raise the stake (A) of the spindle nut (B), then remove and discard the nut.
