Pilot V6-3.5L (2004)
The PCM controls the shift solenoid valves. The conditions of the shift solenoid valve and positions of the shift valve are as follows:
-
The shift solenoid valve A is turned OFF, and the shift valve A is moved to the left side.
-
The shift solenoid valve B is turned ON, and the shift valve B remains in the right side.
-
The shift solenoid valve C is turned OFF, and the shift valve C remains in the left side.
Line pressure (1) passes through the manual valve and becomes line pressure (25). Line pressure (25) stops at shift valve D. Line pressure (1) also
flows to the modulator valve and becomes modulator pressure (6). Modulator pressure (6) flows to the shift solenoid valves and the A/T clutch
pressure control solenoid valves. Under this condition, hydraulic pressure is not applied to the clutches.
NOTE: When used, "left" or "right" indicates direction on the hydraulic circuit.
[D] Position: 1st gear shifting from the [N] position
