Pilot V6-3.5L (2004)
Shifter A/T: Service and Repair
Shift Lever Removal
Shift Lever Removal
SRS components are located in this area. Review the SRS components locations, precautions, and procedures in the SRS section before performing
repairs or service.
1. Remove the steering column upper and lower covers.
2. Remove the instrument panel.
3. Shift the transmission into the [N] position.
4. Remove the cable and nut (A), then separate the shift cable (B) from the shift lever.
5. Rotate the socket holder (C) on the shift cable a quarter turn; the tab (D) on the socket holder will be in the opening (E) of the shift cable bracket
(F). Then slide the holder to remove the shift cable from the shift cable bracket. Do not remove the shift cable by twisting the shift cable guide (G)
and damper (H).
6. Remove the connector lock (A) front the immobilizer receiver unit 5P connector, then disconnect the 5P connector (B) and 7P connector (C) from
the immobilizer receiver unit.