Pilot V6-3.5L (2004)
10. Pry (left driveshaft)/tap (right driveshaft) the inboard joint (A), and remove the driveshaft from the differential case or bearing support as an
assembly. Do not pull on the driveshaft (B); the inboard joint may come apart. Draw the driveshaft straight out to avoid damaging the differential
oil seal or the intermediate shaft outer seal.
Front Driveshafts Disassembly
Front Driveshafts Disassembly
Special Tools Required
^
Threaded adapter, 24 x 1.5 mm 07XAC-001020A
^
Slide hammer, commercially available
Inboard Joint Side:
1. Remove the set ring from the inboard joint (left driveshaft).