Pilot V6-3.5L (2004)
13. Attach the molding (A) with adhesive tape (B) (3M 4240, or equivalent) to the edge of the windshield (C):
-
Be sure the alignment mark (D) of the molding lines up with the alignment mark (E) of the windshield.
-
Be careful not to touch the windshield where adhesive will be applied.
14. Attach the molding upper seal (A) and molding side seal (B) to the inside surface of the molding (C) with adhesive tape (NITTO EE-9100, or
equivalent) as shown:
-
Be sure the molding upper seal and molding side seal line up with the alignment dots (D).
-
Be careful not to touch the windshield where adhesive will be applied.