Pilot 2WD V6-3.5L (2006)
Power Mirror Motor: Testing and Inspection
Power Mirror Actuator Test
1. Remove the mirror mount cover.
2. Disconnect the 8P connector (A) from the power mirror actuator (B).
3. Check actuator operation by connecting power and ground according to the table.
4. If the mirror fails to work properly, replace the mirror actuator.
Defogger Test
5. Check for continuity between the No. 3 and No. 4 terminals of the 8P connector. There should be continuity. If there is no continuity, check for an
open circuit.
