Pilot 2WD V6-3.5L (2006)
Valve Clearance: All Technical Service Bulletins
Engine, Engine Controls - MIL ON/Misfire DTC's Set
09-090
October 12, 2010
Applies To:
2006-08 Pilot 2WD With VCM - ALL
2006-08 Pilot: MIL Comes On With DTC P0300 and One or More of DTCs
P0301 Thru P0306
(Supersedes 09-090, dated December 24, 2009, to revise the information marked by the black bars and asterisks)
REVISION SUMMARY
*^ Under WARRANTY CLAIM INFORMATION, one operation number was changed, and another operation was added.
^
Under REPAIR PROCEDURE, the CKP pattern clear and learn procedures were added.*
SYMPTOM
The MIL comes on with DTC P0300 (random cylinder misfire detected and at least one of DTCs P0301 through P0306 (No.1 through 6 cylinder misfire
detected).
PROBABLE CAUSE
The PGM-FI software misinterprets inputs, causing the DTCs to set.
CORRECTIVE ACTION
Adjust the valve clearance, and update the PGM-FI software with the HDS.
SOFTWARE INFORMATION
HDS Software Version:
2.020.018 or later. HDS Control Module (CM) Update:
Database Update 27-NOV-2009 or later.
NOTE:
To avoid an incorrect repair that would not be covered under warranty, use the software version listed above or a later version.
The updated PGM-FI software program IDs and P/Ns are listed below. If the HDS is loaded with the latest software, and it displays No Update Needed
during the update, the software for this service bulletin is already installed.
WARRANTY CLAIM INFORMATION
The normal warranty applies.
The warranty claim information below applies to the software update.