Pilot 2WD V6-3.5L (2006)
7. Remove and discard the valve stem (A), and the screw (B) from the tire pressure sensor (C).
NOTE: The valve stem grommet (D) might stay in the wheel; make sure you remove it.
Installation
NOTE: Use only wheels that have a TPMS mark (A) on them.
1. Assemble the new valve stem (A), new screw (B), and the sensor-transmitter (C).
NOTE: Always use a new valve stem and new screw.
2. Before installing the tire pressure sensor, clean the mating surfaces on the sensor and the wheel.