Pilot 2WD V6-3.5L (2006)
Map Light: Testing and Inspection
Front Individual Map Light Test
Front Individual Map Light Test
1. Turn the light switch OFF.
2. Carefully pry off the lens (A) with a small screwdriver.
3. Remove the two mounting screws.
4. Disconnect the 3P and 10P connectors (B) from the housing (C).
5. Check for continuity between the terminals in each switch position according to the table.
6. If the continuity is not as specified, check the bulb(s). If the bulb(s) are OK, replace the light.