Pilot 2WD V6-3.5L (2006)
Is the fuse OK?
YES - Go to step 31.
NO - Go to step 25.
25. Remove the blown No. 46 ACGS (15 A) fuse from the under-hood fuse/relay box.
26. Remove PGM-FI main relay 1 (FI MAIN) (A).
27. Check for continuity between body ground and PGM-FI main relay 1 (FI MAIN) 4P connector terminals No. 1 and No. 4 individually.
Is there continuity?
YES - Repair short in the wire between the No. 46 ACGS (15 A) and PGM-FI main relay 1 (FI MAIN). Also replace the No. 46 ACGS (15 A)
fuse.
NO - Go to step 28.
28. Disconnect each of the components or connectors below, one at a time, and check for continuity between PGM-FI main relay 1 (FI MAIN) 4P
connector terminal No. 2 and body ground.
-
PGM-FI main relay 2 (FUEL PUMP)
-
PCM connector B (44P)
-
Each injector 2P connector
-
Camshaft position (CMP) sensor 3P connector
-
Crankshaft position (CKP) sensor A/B 6P connector