Pilot 2WD V6-3.5L (2006)
2. Compress the damper (A) by hand, and move it into position. Loosely install the flange bolt (B), washer (C), and self-locking nut (D).
3. Raise the rear suspension with a floor jack to load it with the vehicle's weight.
4. Tighten the flange bolt and self-locking nut to the specified torque values.
5. Install the rear wheels.
6. Check the rear wheel alignment, and adjust it if necessary.
Spring & Bump Stop Replacement
Spring/Bump Stop Replacement
Spring/Bump Stop
Removal
1. Raise the rear of the vehicle, and support it with safety stands in the proper locations. Remove the rear wheels.