Pilot 4WD V6-3.5L (2008)
![background image](/honda/pilot_4wd/v6-3.5l/Page-2113001.png)
Global Positioning System Antenna: Service and Repair
GPS Antenna Removal/Installation
1. Remove the center panel.
2. Remove the navigation display unit.
3. Loosen the two screw-bolts (A).
4. Pull, and pry up the GPS antenna (B), then remove the GPS antenna.
5. Install the GPS antenna in the reverse order of removal.
NOTE: Be careful when routing the GPS antenna wire so that it does not become pinched, especially near the front passenger's seat and center
console.