Pilot 4WD V6-3.5L (2008)
Remote Switch: Service and Repair
Audio Remote Switch Test/Replacement
Except LX model
SRS components are located in this area. Review the SRS component locations, and the precautions and procedures before doing repairs or service.
1. Remove the driver's airbag assembly.
2. Remove the two screws and the cover (A) from the steering wheel.
3. Remove the two screws from the audio remote switch (B).
4. Disconnect the 4P connector from the audio remote switch.
5. Measure the resistance between the No.3 and No.4 (with navigation system) or No.1 (without navigation system) terminals in each switch position
according to the table.
6. If the resistance is not as specified, replace the remote switch.