Pilot 4WD V6-3.5L (2008)
Front Bumper: Service and Repair
Front Bumper Removal/Installation
NOTE:
-
Have an assistant help you when removing and installing the front bumper.
-
Take care not to scratch the front bumper and body.
-
Put on gloves to protect your hands.
1. Remove the front bumper as shown.
2. Install the bumper in the reverse order of removal, and note these items:
-
Make sure the front bumper engages the hooks on both side stiffeners, the corner upper beams, and the center upper beam securely.
-
Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
-
Push the clips into place securely.