Pilot 4WD V6-3.5L (2008)
Fuel Door Release Cable: Service and Repair
Fuel Fill Door Opener Cable Replacement
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
1. Remove these items from the left side of the vehicle:
-
Front door sill trim
-
B-pillar lower trim
-
Rear door sill trim
-
Rear side trim panel
2. Pull the carpet back as necessary.
3. Disconnect the fuel fill door opener cable (A) from the opener (B).
4. Release the opener cable from the clips (C, D), then remove the fuel fill door latch (E) from the body by turning it 90°.
5. Remove the fuel fill door opener cable from the vehicle. Take care not to bend the cable.
6. Install the cable in the reverse order of removal.