Pilot 4WD V6-3.5L (2008)
Trunk / Liftgate Latch: Service and Repair
Tailgate Latch Replacement
NOTE: Put on gloves to protect your hands.
1. Remove the tailgate trim panel.
2. Disconnect the handle cable (A), cylinder rod (B), tailgate latch actuator connector (C), and tailgate latch switch connector (D), and detach the
connector.
3. Remove the bolts, then remove the tailgate latch (A).
4. Install the tailgate latch in the reverse order of removal, and note these items:
-
Make sure the connectors are plugged in properly and the handle cable is connected properly.
-
Make sure the cable actuates the latch before you close the tailgate.
-
Make sure the tailgate opens properly and locks securely.
-
For some models, make sure the security system operates properly with the tailgate opened and closed.