Pilot 4WD V6-3.5L (2008)
Body Emblem: Service and Repair
Emblem Replacement
NOTE: When removing the emblems, take care not to scratch the body.
1. Remove the screws securing the "H" emblems:
-
To remove the front "H" emblem, remove the front bumper.
-
To remove the rear "H" emblem, remove the rear license trim.
2. Use a piece of string to cut through the adhesive tape on the emblem.
3. Clean the body surface with a sponge dampened with isopropyl alcohol. After cleaning, keep oil, grease, and water from getting on the surface.
4. Apply the emblems where shown.