Pilot 4WD V6-3.5L (2008)
3. Disconnect the vanity mirror light connector (C).
4. Using a flat-tip screwdriver, push the hook (D), and turn the holder 90 °, then pull it out.
4. Remove the roof console (A).
1. Remove the lens (B).
2. Remove the screws.
3. Pull out the roof console, and disconnect the front individual map light connectors (C).
5. Lower the grab handle, then pry out the lid (A). Remove the self-tapping ET screws, then remove the grab handle (B). Remove the remaining grab
handles.
6. Remove the interior lights (A).