Pilot 4WD V6-3.5L (2008)
![background image](/honda/pilot_4wd/v6-3.5l/Page-2263015.png)
-
Replace the upper clip with a new one because it was damaged.
8. Before installing the D pillar trim (A), carefully remove the upper clip (B).
9. Check the overlap between the headliner and D-pillar trim, and if necessary, adjust it.
Carefully reinstall the upper clip (A) to the D-pillar trim (B). Be sure that the grommet (C) is nearest to the top of the pin (D) as shown.