Pilot 4WD V6-3.5L (2008)
Sunroof / Moonroof Cable: Service and Repair
Drain Channel Slider and Cable Assembly Replacement
1. Remove the frame.
2. Remove these parts from the frame:
-
Sunshade
-
Moonroof motor.
3. Put on gloves to protect your hands. Remove the screws (A, B) securing the slide stops (C), and cable tube rear brackets (D), cable tube side
bracket mounting bolts (E) and the cable tube mounting screws (F) from both sides of the frame (G).
4. Turn both cable tube side brackets (A) up to release the hooks (B) from the holes in both sides of the frame.
5. Pivot the glass brackets (C) down by sliding the lift up sliders (D) back, then slide both glass brackets back with the link lifters.
6. Slide the cable assembly (E) half-way.