Pilot 4WD V6-3.5L (2008)
9. While holding the recline lever (A) away from the seat-back cover (B), pull the retainers (C) out from under the lever (D).
10. Pull back the edge of the seat-back cover all the way around, and release the clips (A), then remove the seat-back cover (B).
11. Install the seat-back cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hook and
clips.
-
Replace any clips (A) you removed with new ones using commercially available upholstery ring pliers (B).
Seat Cushion Cover
1. Left second row seat: Remove the seat belt buckle pocket, then remove the left second row seat belt buckle and center second row seat belt
detachable anchor complete from the seat cushion.
2. Slide the second row seat forward fully.
3. Remove the pivot bolt cover. Using a T30 TORX bit, remove the pivot bolt from both sides, left second row seat, right second row seat.