Pilot 4WD V6-3.5L (2008)
Parking Brake Shoe: Procedures
Parking Brake Shoe Lining Break-in
WARNING:
Do this operation in a safe area.
NOTE: Do the brake linings surface break-in when replacing shoes with new brake linings and/or new rear brake disc/drum.
1. Park the vehicle on a firm, level surface.
2. Do the major parking brake adjustment. See: Adjustments
3. Do the minor parking brake adjustment. See: Parking Brake Cable/Adjustments
4. Press the parking brake pedal 2 to 4 clicks.
5. Drive the vehicle for 1/4 mile (400 m) at no more than 31 mph (50 km/h).
6. Stop the vehicle and release the parking brake for 5 - 10 minutes to allow the brake disc/drum to cool.
7. Repeat steps 4 through 6 three more times.
8. Check the parking brake pedal adjustment.