Pilot 4WD V6-3.5L (2008)
Cruise Control Switch: Service and Repair
Cruise Control Set/Decel, Resume/Accel, Cancel Switch Test/Replacement
Cruise Control Set/decel, Resume/accel, Cancel Switch Test/Replacement
SRS components are located in this area. Review the SRS component locations , and the precautions and procedures, in the SRS before doing repairs or
service.
1. Remove the driver's airbag.
2. Remove the cover (A), then remove the set/decel, resume/accel, cancel switch (B).
3. Check for continuity between the terminals in each switch position according to the table.
-
If there is continuity, and it matches the table, but switch failure occurred on the cruise control input test, check and repair the wire harness on
this switch circuit.
-
If there is no continuity in one or both positions, replace the switch.