Pilot 4WD V6-3.5L (2008)
![background image](/honda/pilot_4wd/v6-3.5l/Page-759001.png)
Water Pump: Service and Repair
Water Passage Replacement
Water Passage Replacement
1. Drain the engine coolant.
2. Remove the intake manifold.
3. Remove the upper radiator hose (A) and the lower radiator hose (B).
4. Remove the water bypass hose (A) and ground cable (B).
5. Remove the harness holder mounting bolt (C), then remove the harness holder (D) from the bracket.
6. Remove the heater hoses.
7. Remove the engine wire harness connectors from the water passage.