Pilot 4WD V6-3.5L (2008)
Crankshaft: Service and Repair
Crankshaft and Piston Removal
Crankshaft and Piston Removal
1. Remove the engine assembly.
2. Remove the transmission.
3. Remove the drive plate.
4. Remove the cylinder heads: J35A9 engine J35Z1 engine
5. Remove the crankshaft position (CKP) sensor.
6. Remove the timing belt drive pulley from the crankshaft.
7. Remove the oil pan.
8. Remove the engine block end cover.
9. Remove the rocker arm oil control solenoid/oil filter assembly (J35A9 engine).
10. Remove the oil filter base/oil filter assembly (J35Z1 engine).