Pilot 4WD V6-3.5L (2008)
Valve Cover: Service and Repair
Cylinder Head Cover Removal
Cylinder Head Cover Removal
Front
1. Remove the intake manifold.
2. Remove the three ignition coils from the front cylinder head.
3. Remove the two bolts (A) securing the harness holder.
4. Remove the dipstick (B) and positive crankcase ventilation (PCV) hose (C).
5. Remove the front cylinder head cover.
Rear
1. Remove the intake manifold.
2. Remove the three ignition coils from the rear cylinder head.
3. Remove the bolt (A) securing the power steering (P/S) hose bracket.