Pilot 4WD V6-3.5L (2008)
Drive Belt: Service and Repair
Drive Belt Replacement
Special Tools Required
Belt tension release tool Snap-on YA9317 or equivalent, commercially available.
J35A9 engine
1. Move the auto-tensioner (A) using the belt tension release tool to relieve tension from the drive belt, then remove the drive belt.
2. Install the new belt in the reverse order of removal.
J35Z1 engine
1. Set a socket wrench in to the drive belt auto-tensioner (A), and slowly turn the wrench in the direction shown, then remove the drive belt.
NOTE: This is a hydraulic type auto-tensioner, so you must turn the wrench slowly.
2. Install the new belt in the reverse order of removal.