Pilot 4WD V6-3.5L (2008)
![background image](/honda/pilot_4wd/v6-3.5l/Page-642001.png)
Drive Belt Tensioner: Service and Repair
Auto-Tensioner Replacement
Drive Belt Auto-tensioner Replacement
J35A9 engine
1. Remove the drive belt.
2. Remove the splash shield.
3. Remove the auto-tensioner.
4. Install the auto-tensioner in the reverse order of removal.
J35Z1 engine
1. Remove the drive belt.
2. Remove the splash shield.
3. Remove the auto-tensioner.
4. Install the auto-tensioner in the reverse order of removal.