Pilot 4WD V6-3.5L (2008)
6. Tighten the four bolts (A) securing the transmission, then install the torque converter cover (B).
7. Install the rear warm up three-way catalytic converter (rear WU-TWC) bracket.
8. If the engine is still in the vehicle, do the following steps.
9. Install exhaust pipe A using new gaskets and new self-locking nuts.
10. Install the front subframe stiffener using new bolts.
11. Install the splash shield.
12. Refill the engine with engine oil.
13. Lower the vehicle on the hoist.