Pilot 4WD V6-3.5L (2008)
4. Install the evaporative emission (EVAP) canister hose (A), transmission breather hose clamp bracket (B), and water bypass hoses (C).
5. Install the positive crankcase ventilation (PCV) hose (A) and brake booster vacuum hose (B).
6. Connect the engine wire harness connectors, and install the wire harness clamps to the intake manifold.
^
Intake air temperature (IAT) sensor connector
^
Throttle actuator connector
^
Manifold absolute pressure (MAP) sensor connector
^
Evaporative emission (EVAP) canister purge valve connector
^
Intake manifold tuning (IMT) valve actuator connector (J35Z1 engine)
7. Install the intake air duct (A), then install the breather pipe (B).