Pilot 4WD V6-3.5L (2008)
Camshaft Oil Seal: Service and Repair
Camshaft Oil Seal Installation - In Car
Special Tools Required
Camshaft oil seal driver 07PAF-0030100
1. Dry the camshaft oil seal housing.
2. Apply a light coat of multipurpose grease to the lip of the camshaft oil seal.
3. Using the camshaft oil seal driver (A), washer (B), and a 12 x 75 x 1.25 mm bolt (C), press in the camshaft oil seal (D) about 0.5 - 1.5 mm (0.02 -
0.06 in.) below the surface of the cylinder head.