Pilot 4WD V6-3.5L (2008)
![background image](/honda/pilot_4wd/v6-3.5l/Page-2006001.png)
Hose/Line HVAC: Service and Repair
Rear A/C Line Replacement
Rear A/C Line Replacement
Removal
1. Recover the refrigerant with a recovery/recycling/charging station.
2. Disconnect the rear A/C suction line (A) and receiver line (B) at the front evaporator.
3. Remove the screws from the two clamps (A) along the engine compartment bulkhead, then free the rear A/C lines (B) from the clamps.
4. Raise the vehicle on a lift, and remove the left front wheel.
5. Remove the screw from the A/C line clamp (A) above the steering rack on the driver's side.
6. Remove the screw from the A/C line clamp (A) next to the steering rack.