Pilot 4WD V6-3.5L (2008)
![background image](/honda/pilot_4wd/v6-3.5l/Page-2506001.png)
Hazard Warning Switch: Service and Repair
Hazard Warning Switch Test/Replacement
1. Remove the center panel.
2. Disconnect the 10P connector (A) from the hazard warning switch (B).
3. Remove the hazard warning switch.
4. Check for continuity between the terminals in each switch position according to the table.
5. If the continuity is not as specified, replace the bulb (C) or the switch.