Pilot 4WD V6-3.5L (2008)
![background image](/honda/pilot_4wd/v6-3.5l/Page-977001.png)
Information Bus: Testing and Inspection
Navigation Communication Line Circuit Troubleshooting
Navigation Communication Line Circuit Troubleshooting
1. Disconnect navigation unit connector A (20P).
2. Disconnect climate control unit connector A (20P).
3. Check for continuity between the following terminals of climate control unit connector A (20P) and navigation unit connector A (20P).
Is there continuity?
YES - Go to step 4.
NO - Repair open in the wire(s) between the climate control unit and the navigation unit.
4. Check for continuity between body ground and climate control unit connector A (20P) terminals No. 17, 18, and 19 individually.
Is there continuity?
YES - Repair short to body ground in the wire(s) between the climate control unit and the navigation unit.
NO - Check for loose wire or poor connections at climate control unit connector A (20P) and at the navigation unit connector A (20P). If the
connections are good, substitute a known-good climate control unit and/or navigation unit, and recheck. If the symptom/indication goes away,
replace the original climate control unit and/or navigation unit.