Pilot 4WD V6-3.5L (2008)
Door Unit
4. Carefully pry off the driver's door switch trim.
5. Disconnect the connectors (A).
6. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 7.
7. Make the following input tests at connector A (20P).
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 8.
