honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Manifold Pressure/Vacuum Sensor > < Malfunction Indicator Lamp|Description and Operation|Page 3248
Page 10
background image

Is there continuity?

YES - Go to step 66.

NO - Repair open in the wire(s) between PCM (A22, B1, B36, B43, C1, C40) and body ground (G101).

66. Disconnect the APP sensor 6P connector.
67. Check for continuity between PCM connector terminal A24 and body ground.

Is there continuity

YES - Repair short in the wire between the PCM (A24) and the APP sensor.

NO - Update the PCM if it does not have the latest software, or substitute a known-good PCM, then recheck. If the symptom/indication goes away
with a known-good PCM, replace the original PCM.

Manifold Pressure/Vacuum Sensor > < Malfunction Indicator Lamp|Description and Operation|Page 3248