Pilot 4WD V6-3.5L (2008)
Seat Heater Relay: Testing and Inspection
Power Relay Test
Use this chart to identify the type of relay, then do the test listed for it.
NOTE: For the turn signal/hazard relay input test, refer to Lighting and Horns.
Normally-open type A
Check for continuity between the terminals.
-
There should be continuity between the No. 1 and No. 2 terminals when battery positive terminal is connected to the No. 4 terminal, and battery
negative terminal is connected to the No. 3 terminal.
-
There should be no continuity between the No. 1 and No. 2 terminals when power is disconnected.