Pilot 4WD V6-3.5L (2008)
Air Bag Deactivation Indicator: Testing and Inspection
Passenger's Airbag Cutoff Indicator Illumination Bulb Test
1. Remove the center panel.
2. Push out the passenger's airbag cutoff indicator (A) from behind the center panel.
3. Disconnect the 7P connector (B) from the passenger's airbag cutoff indicator.
4. Check for continuity between the No.4 and No.6 terminals of the indicator. If there is no continuity, replace the bulbs (C).
NOTE: Both illumination bulbs are connected in parallel. If there is continuity, remove one bulb at a time and recheck.
5. Install the parts in the reverse order of removal.